Medidor ePAR Apogee MQ-610 | Sensor cuántico de 400 - 750 nm con medidor portátil y cable de 2 m
- El medidor Quantum PAR extendió el rango de ePAR de 400 nm a 750 nm.
- El medidor portátil está conectado mediante un cable y muestra lecturas en tiempo real
- Registra muestras y registra mediciones de intensidad promedio y integral de luz diaria (DLI)
Enviado desde almacén de la UE o EE. UU.
Devoluciones en 14 días sin complicaciones
Este medidor Apogee Quantum PAR mide el rango extendido de ePAR de 400 nm a 750 nm.
Si está midiendo el espectro de luz de crecimiento que incluye una proporción significativa de rojo FAR, este es el medidor PAR que necesita.
Las últimas investigaciones han demostrado que el rojo lejano es fotosintéticamente activo, pero los sensores Quantum PAR tradicionales no miden las longitudes de onda entre 700 nm y 750 nm. El sensor Apogee ePAR mide el espectro PAR y el espectro del rojo lejano en un solo sensor.
El medidor portátil está conectado mediante un cable y muestra lecturas en tiempo real, registra muestras y registra la intensidad promedio y las mediciones de la integral de luz diaria (DLI). A diferencia del cabezal del sensor, el medidor portátil no es resistente al agua.
FOR SCIENTISTS & SERIOUS GROWERS - Designed by the Apogee Instruments’ engineering team under the direction of world-renowned crop physiologist, Bruce Bugbee, PhD, the MQ-610 ePAR meter is the first in its class among leading scientists and serious growers for accurately measuring the new extended photosynthetically active radiation (ePAR) from 400 to 750 nm for all light sources.
NEW ePAR RANGE - Laboratory-grade measurement of the newly defined 400-750 nm ePAR has been found to be photosynthetically active beyond the traditional 400-700 nm (PAR). Much of the transformative work to define the ePAR range was conducted by Dr. Shuyang Zhen and Dr. Bruce Bugbee. The MQ-610 can accurately measure far-red photons (700-750 nm), found in many next-generation LED fixtures, the sun, and other light sources, which cannot be measured by traditional PAR meters.
QUALITY ePAR METER - Unlike commonly available LUX or footcandle meters used for measuring light for human vision, our meters feature a laboratory-grade ePPFD (extended photosynthetic photon flux density) optical detector precisely calibrated to measure the light intensity in µmol m-2 s-1 of the specific color wavelengths (including far-red) emitted by LEDs, HPS, MH, sunlight, and other light sources utilized by plants for photosynthesis. The sensor contains a precision silicon photodiode detector, a custom optical filter, and an acrylic diffuser all housed in a self-cleaning, dome-shaped, anodized aluminum sensor head.
EXTREMELY ACCURATE & STABLE - Precisely measures and combines the intensity of all photons between 400 and 750 nm to give a single ePAR reading in µmol m-2 s-1 within 5 % uncertainty. Our ePAR meter has a stable, accurate calibration with an accuracy drift rate of less than 2% per year.
THREE MEASUREMENT MODES - The meter has a spot measurement, sample, and log mode and will record an integrated daily total in mol m-2 s-1. Sample mode will record up to 99 manual measurements and log mode will power the meter on and off to make a measurement every 30 seconds. Every 30 minutes, the meter will average the sixty 30 second measurements and record the averaged value to memory, up to 99 averages. Once full, it will overwrite the oldest measurements with new ones. A daily light integral will be recorded from the 48 averaged measurements for a day’s worth of readings and is downloadable via Apogee AC-100 cable.
RUGGED & READY TO USE - The sensor head is machined aluminum and potted solid with epoxy for years of use in harsh environments, including underwater. The handheld meter is attached by a cable and displays real-time readings, records samples, and logs average intensity and daily light integral (DLI) measurements. Unlike the sensor head, the handheld meter is not waterproof.
MADE IN THE USA - All meters are designed, built, and calibrated at our headquarters in Logan, Utah, USA. Apogee Instruments has been creating research-grade instruments for scientists and serious growers for over 25 years. All meters are backed by our industry leading four-year warranty and supported by our world-class, US-based customer support team.
Calibration Uncertainty ± 5 %
Measurement Range 0 to 4000 µmol m-2 s-1
Measurement Repeatability Less than 0.5 %
Long-term Drift (Non-stability) Less than 2 % per year
Non-linearity Less than 1 % (up to 4000 µmol m-2 s-1)
Response Time Less than 1 ms
Field of View1 80°
Spectral Range 400 to 750 nm ± 5 nm (wavelengths where response is greater than 50 %)
Directional (Cosine) Response ± 2 % at 45° zenith angle, ± 5 % at 75° zenith angle
Azimuth Error Less than 0.5 %
Tilt Error Less than 0.5 %
Temperature Response -0.11 ± 0.04 % per C
Uncertainty in Daily Tota Less than 5 %
Housing Anodized aluminum body with acrylic diffuser
IP Rating IP68
Operating Environment-40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to depths of 30 m
Meter Dimensions 126 mm length, 70 mm width, 24 mm height
Sensor Dimensions 30.5 mm diameter, 37 mm height
Mass (with 5 m of cable)140 g
Cable 2 m of two conductor, shielded, twisted-pair wire; additional cable available; TPR jacket
Warranty 4 years against defects in materials and workmanship
Manufactured Made in the USA