
The Lightmyleaf 240W LED grow light is a 'Quantum Board' bar type light which will cover an area up to 3ft x 3ft or 4ft x 2ft for flowering.
The fixture is simple in design in the typical 'Quantum Board' style. However it is very neatly finished with a nice pattern finish on the back of the aluminium heatsink.
The LED driver is mounted on the back of the heatsink with space between the two to allow heat to dissipate from the heatsink without overheating the LED driver. The driver has on board dimming and RJ12 connections for daisy chain control.
There are neutral white LEDs with a color temperature of 3700K and added 660nm deep red LEDs to increase the system and photosynthetic efficiency. The light output is full spectrum and suitable for growing from seed to harvest.
The LEDs are also coated with silicone to protect them from dirt and moisture.
We tested the PAR output of the fixture in a 3ft x 3ft test space with silver mylar reflective walls at 16 inches hanging height. We used the Spoton quantum sensor to take 36 PAR readings evenly spaced across the test area.
The average PAR recorded across the test area was 609 µmos/m²/second. The system efficiency (the total PAR reaching the plant canopy divided by power consumed) is 2.0 µmols/watt or usable PPF/watt.
Overall this grow light is a high quality fixture with good system efficiency and full spectrum output.
Buy in their US store here: https://www.lightmyleaf.com/product/240w-led-grow-light/
Leave a comment
Also in Grow Light Reviews
Lightmyleaf 800W LED Grow light PAR test and review
By Shane Torpey July 19, 2022
NEW MIGRO ARAY
By Shane Torpey July 13, 2022
Cretivity CF700 LED grow light review
By Shane Torpey June 23, 2022